IP Mapping by Phase | AORXI Homelab

Per-phase mapping distinguishes current bootstrap addresses from final routed addresses. OPNsense owns every routed Site A .1; the switches have management IPs only. Site B is parked and unchanged.

Site A address checkpoints for the clean-slate A0-A11 campaign. The flat bootstrap network is the starting point; after A5, the UCG remains only as the upstream WAN feed while the LAN stays on final 10.10.x addresses. Site B is parked and unchanged.

A0: Record the Working Bootstrap Island Preserve

Capture the observed UCG Max network before introducing the target fabric.

Flat 192.168.0.0/23Gateway 192.168.0.1No final VLAN gateways liveExports and rollback map required

SITE A10.10.0.0/16

UCG Maxbootstrap router

flatgateway192.168.0.1

sa-edge-01E200

Lifecycle addresses; endpoints are proven one at a time on XG6 p4.

flatProxmox192.168.1.10

flatIPMI192.168.0.10

sa-stor-015049A-T

Lifecycle addresses; endpoints are proven one at a time on XG6 p4.

flatProxmox192.168.1.20

flatIPMI192.168.0.20

SITE BOUT OF SCOPE

Parkedunchanged design

No Site B IP, VLAN, port, or phase change is part of this campaign.

Site A switches are Layer 2 only. OPNsense owns every routed .1; VLANs 25 and 60 have no gateway, 65 is reserved, 999 is an unrouted native sink, and 253/4040 are absent.